American Recreational Tram Systems Inc -- "Your Safe Sensible Solutions"
American Recreational Tram Systems Inc -- "Your Safe Sensible Solutions"

On-site Installation

On-site Evaluation | Site Preparation | Production | On-site Installation | Post Install Procedure

Track Installation

Lengths of track by the string-line

Our professional installation crew begins laying out and securing the track for your American Recreational Tram System. The track supports are 10 feet long and are placed approximately 5-8 feet into the ground, depending on soil & rock conditions.  Following the installation of each section of track, the sections are thoroughly cross-braced to strengthen and ensure stability of the track.
Track supports being drilled 5-8 feet into the ground Completed track installation

 

Installation of Drive System

The Drive System frame is attached to the top end of the track assembly.  Once the frame has been installed, the electric motor, electronic brake, heavy-duty gear box, pillow blocks, over speed braking system and main cabling sheaves are installed and inspected.

 Installing drive-unit
Wiring the tram system

Installation of Electrical System

The installation of the electrical system is completed. This includes the installation and calibration of limit switches and control buttons.

Installation of Cabling Systems

The installation of the main cable system, over limit cable system and the over speed cable system is completed from the top to the bottom of your Tram System.

Installing galvanized cables
Programming the control panel

Installation of Electrical Panel

The final phase of your American Recreational Tram System installation is the addition of the electrical panel.  All power service connections are made and inspected for complete functionality.

On-site Evaluation | Site Preparation | Production | On-site Installation | Post Install Procedure

Copyright © American Recreational Tram Systems, LLC. All rights reserved.